technical data sheet 1 / 3 snap-in straight male jack r222.221.702 smooth bore solder type cable .047 series : smp issue : 0745 b in the effort to improve our products, we reserve the right to make changes judged to be necessary. all dimensions are in mm. .. pn ao components body center contact outer contact insulator gasket others parts - - materials stainless steel + brass beryllium copper - ptfe - beryllium copper - - platings ( m) passivated + gold1.3 over nickel2 gold 1.27 over nickel 1.27 - bbr 2 - -
technical data sheet 2 / 3 snap-in straight male jack r222.221.702 smooth bore solder type cable .047 series : smp issue : 0745 b in the effort to improve our products, we reserve the right to make changes judged to be necessary. packaging standard unit o ther 100 ?w? option contact us electrical characteristics impedance 50 ? frequency 0-40 ghz vswr 1.50 + 0,0000 x f(ghz) maxi insertion loss 0.12 f(ghz) db maxi rf leakage - ( - f(ghz)) db maxi voltage rating 335 veff maxi dielectric withstanding voltage 500 veff mini insulation resistance 5000 m ? mini mechanical characteristics center contact retention axial force ? mating end na n mini axial force ? opposite end na n mini torque na n.cm mini recommended torque mating na n.cm panel nut na n.cm clamp nut na n.cm a/f clamp nut 0,0000 mm mating life 1000 cycles mini weight 0,9230 g environmental operating temperature -65/+165 c hermetic seal na atm.cm3/s panel leakage na specification cable assembly stripping abcdef m m 1,30 0,00 0,00 0,00 0,00 0,00 assembly instruction : recommended cable(s) ut47 m17/151-00001 characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. intrinsic limitations of the cable may diminish the performance of the assembly cable retention - pull off 45 n mini - torque na n.cm tooling part number description hexagon .. . r282.740.030 soldering mounting r282.743.100 positioner for soldering smp r282.744.254 positioner for soldering smp others characteristics rf leakage -80db dc-3 ghz -65 3-26.5 ghz compliant with mil-std-348
technical data sheet 3 / 3 snap-in straight male jack r222.221.702 smooth bore solder type cable .047 series : smp issue : 0745 b in the effort to improve our products, we reserve the right to make changes judged to be necessary. body center contact components 1 2 strip the dielectric of the cable . clean the cable . soldering 180c temperature stoking do not exceded 250c screw the positoner onto the soldering jig. slide the center contact onto the cable inner conductor against insulator. fit the cable assembly onto the soldering jig.. solder the contact. after cooling remove cable assembly from the jig. insert cable+centre contact in the connector. slide the positioner in the connector interface. slide cable into the connector body until it bottoms against. slide positoner into the assembly. tighten. solder the body onto the cable. after cooling remove cable assembly from the jig. we recommend a thermal preconditionning cable stripping cables a insulator tighten solder connector positioner soldering jig cable in position 3 insulator soldering jig cable tighten solder positioner center contact
|
